Lab 2

Title: Separation of miscellaneas and Solids Purpose: The purpose of this experiment was to drill the process of separating pastiches of different solids. Procedure: This experiment consisted of different processes to break-dance a mixture of solids into the four individual solids: sand, benzoic dit, agitate fillings, and atomic number 11 chloride. To remove the iron fillings from the mixture I prevail a attractor and scanned it across the entire mixture and the attractive force forced flumped up all the iron pieces. Then to pick out the sand from the rest of the mixture I het up the mixture with body of water in a beaker and when I poured the heat up pellucid into a cup the sand remained in the puke of the beaker. in conclusion to separate the benzoic acid and sodium chloride I utilize a filtration system and the sodium chloride and water drained into a cup while the benzoic acid remained on the filter. information: Item | push-down list (grams ) | Weighing beauty | 0.6 g | Dish + Mixture | 7.9 g | Net Mass of Mixture | 7.

3 g | | Mass (Grams) | Percent of Mixture | Iron Fillings | 1.8g | 26.9% | Sand | 1.5g | 22.4% | flurry Salt | 1.9g | 28.4% | Benzoic paneling | 1.5g | 22.4% | Total: | 6.7g | | Observations: Some things I observed during this laboratory accommodate the magnet not picking up some of the smaller iron particles without getting in reality close to the solids mixture. as well as both the sodium chloride had somewhat of a sour aspect when heated. The water in the sodium chloride took protracted than I had expect to e vaporate considering the lack of humidity in! the climate here.If you privation to get a full essay, consecrate it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper